Jaws 1 hardware for Fractal Fret Press (earlier versions)
This is a kit of components to aid in reconfiguring your Fractal Fret Press V1.1-1.3 to be adaptable to the StewMac Jaws 1 locking pliers fret press system. Fractal Fret Press is not included.
A 1/8” hole modification is require to be drilled thought the bottom of the bulkhead. Step-by-step instructions for the conversion can be found here.
Included in the kit are:
1 - M3x14 stainless steel screw
1 - 4mm to 3mm brass reducer tube
2 - 4mm ID .5mm thick brass washers
Shipping is included in the US. If outside of the US, It is recommended to source these parts locally due to high costs of shipping. Contact me for any questions
This is a kit of components to aid in reconfiguring your Fractal Fret Press V1.1-1.3 to be adaptable to the StewMac Jaws 1 locking pliers fret press system. Fractal Fret Press is not included.
A 1/8” hole modification is require to be drilled thought the bottom of the bulkhead. Step-by-step instructions for the conversion can be found here.
Included in the kit are:
1 - M3x14 stainless steel screw
1 - 4mm to 3mm brass reducer tube
2 - 4mm ID .5mm thick brass washers
Shipping is included in the US. If outside of the US, It is recommended to source these parts locally due to high costs of shipping. Contact me for any questions
This is a kit of components to aid in reconfiguring your Fractal Fret Press V1.1-1.3 to be adaptable to the StewMac Jaws 1 locking pliers fret press system. Fractal Fret Press is not included.
A 1/8” hole modification is require to be drilled thought the bottom of the bulkhead. Step-by-step instructions for the conversion can be found here.
Included in the kit are:
1 - M3x14 stainless steel screw
1 - 4mm to 3mm brass reducer tube
2 - 4mm ID .5mm thick brass washers
Shipping is included in the US. If outside of the US, It is recommended to source these parts locally due to high costs of shipping. Contact me for any questions